top of page

Fire Pumps

The Pumps are driven with the help of Diesel engine / Electric motors with horizontal split case pumps. 

These Pumps are typically used in fire fighting applications for supplying water to fire hose reels, fire hydrants, or sprinkler systems.

Jockey pump.png
Diesel fire Pump.png

Fire Pump

  • Certified: UL listed, NFPA, FM (NAFCO)

  • The diesel engine has driven pump set with heat exchanger

  • Fire pump with controller

  • Jockey Pump with a controller mounted on separate skid

  • Pump set includes fuel system, Battery system, exhaust system, Air relief Valve, Suction & Discharge gauge.

  • Electric Motor Range: 40 HP to 250 HP.

  • Diesel Motor Range: 45 HP to 275 HP.

  • Jockey Pump Range: 2 HP to 15 HP.

Deluge Valve

Deluge Valve is known as a system control valve in a deluge system used for the fast application of water in the spray system.

The Valve prevents a reverse flow of water from the installation into the fire pump room, but in case of a fire sprinkler is activated (opened) due to fire, the alarm valve will open & permit water flow into the system.

Deluge valve

  • Certified: UL listed

  • Type: Mechanically (Water Motor Gong), Electrically (Alarm Pressure Switch).

  • Max. Working Pressure: 175 PSI

  • Hydrostatic Test Pressure: 500 PSI

  • Flange Dimension: 125 ANSI B16.1 / Class 150  B16.5

  • Nominal Size: 50,80,100,150,200 NB

  • Material: Cast Steel

  • Mounting: Vertical or Horizontal

Deluge-Valves-300x276.png

Alarm Valve

Alarm Valve is a wet pipe sprinkler system water check valve which is installed in the wet pipe sprinkler system.

The valve can generate an alarm in two ways mechanically and electrically.

Alarm Valve .png

Alarm Valve

  • Certified: UL listed

  • Type: Mechanically (Water Motor Gong), Electrically (Alarm Pressure Switch).

  • Max. Working Pressure: 175 PSI

  • Hydrostatic Test Pressure: 500 PSI

  • Flange Dimension: 125 ANSI B16.1 / Class 150  B16.5

  • Nominal Size: 50,80,100,150,200 NB

  • Material: Cast Steel

  • Mounting: Vertical or Horizontal

Butterfly Valve

  • Certified: ISI, FM approved, UL listed

  • Operating Pressure: Up to 16 Bar (PN16)

  • Available Range: DN 40 to DN 300

  • Type: Isolation Valve

  • Working Temperature: -20°C to 120°C

  • As compare to other valves, they are lightweight

  • Easy to Repair & Maintenance

butterfly-valve-butterfly-valve-png.png
gate-valve.png

Gate/Sluice Valve

  • Available range: 2" to 12"

  • Certified: ISI, UL listed & FM Approved

  • Max. Working pressure: 300 PSI (21 Bar)

  • End Connection: Flanged ANSI B16.1/AWWA or BS EN 1092 PN16

Non Return Valve

  • Certified:  ISI, UL listed

  • Also called as Reflux Valve or Check valve

  • Dual Plate wafer type valve PN16

  • Take lesser place as compared to other valves

  • Less Wear & Tear of the seat surface

  • End Connection is designed for flanges of ANSI B Class-125/ASME B class -150

  • Hydrostatic pressure (shell): 25 Bar, Seat: 16 Bar

  • Available Size: 1"1/2 to 14" (40mm to 350mm)

  • Working Temperature: up to 80°C

NRV.png
air release valve.png

Air Release Valve

  • Certified: UL listed, ISI

  • To release air from pressurized fire hydrants pipelines

  • Screwed male end to IS 554/BS 21/ISO 7

  • Open Discharge type

  • Material: bronze

  • Hydrostatic Pressure: 25 Bar (Shell), 16 Bar (Seat)

  • Set Pressure Range: 0-10 Bar (MAX)

  • Working Temperature: up to 80°C

  • Available Size: 1/2",3/4",1",1 1/4",1 1/2", 2".

Ball Valve

  • Certified: UL listed, ISI

  • Both ends are screwed female ends to IS 554 / BS 21/ ISO 7.

  • Material Availability: Bronze, Steel, Chrome Plated provided with Stainless steel ball.

  • Hydrostatic Pressure: 25 Bar (Sheel), 16 Bar (Seat)

  • Max. Working Temperature: Up to 220°C

  • Available Size: 1/2" (15 mm) to 4" (100 mm)

Ball Valve.png
bottom of page